1x 5V power supply capable of powering both the Raspberry Pi and the SATA drive separately.1x MicroSD Card 8 or 16GB – the fastest you can afford.1x Raspberry Pi 3 (or any other model you have).Here are all the parts needed for this project. The following figure shows a high-level overview of the project. The surveillance system built includes: one Raspberry Pi acting as a HUB with 1TB SATA, and 4 cameras (each one connected to a Raspberry Pi Zero W) that can be monitored through the HUB.Īll devices are connected to your local network, and you can access all the cameras through the hub using a browser on your computer (or other device on the local network). This project was written by Julian Silver and edited by Rui Santos and Sara Santos.įor an introduction to the MotionEyeOS, you can read this introductory blog post.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |